The Creality Ender 3 is our pick for the "Best 3D Printer Under $200 of Summer 2018".

By IRIS_CREALITY3D | 30 September 2018 | 14 Comments
    The Creality Ender 3 is our pick for the "Best 3D Printer Under $200 of Summer 2018".
 A pre-assembled kit with a modest print area of 220 x 220 x 250mm, the Creality Ender 3 appears to sit    beneath the CR-10 in terms of Creality’s printer lineup. A solid mid-range option, priced above the bargain Ender 2 but cheaper than the CR-10.
 The Creality Ender 3 is an extraordinary 3D printer when you take the sub-$200 price tag into consideration.
 There are a number of features that make the creality Ender 3 one of the most popular machines currently on the    market. Ender 3 is really easy to assemble, although it requires manual calibration-the enlarged bed leveling knobs    make the process convenient.
Another impressive feature of the Creality Ender 3 is its ability to fully recover and resume a print after losing power or getting disconnected. This is a feat made popular by the Prusa i3 MK3 3D printer, but the fact that it was implemented into a sub-$200 3D printer makes it worthy of mentioning.


Printing models:

Printing model
More review about Ender 3

                                                                                     Find more review about ender 3, please click:
                                                                                                 Click to buy:
                                                                                                                        Contact e-mail:

frank silver
February 10,2020 00:02
my ender 3 pro has not recognized the sd card, I have overwritten the card and formatted it with sd card foundation formatter and reloaded info from clearity ender 3 pro website but now it says no card, I int.the card and it shows a folder but doesn't pri
Hayden Turley
November 12,2019 10:10
My printer does great until around 35% of my print. Then the extruder does a readjustment and dips into my print knocking it off the bed or melting the print onto the extruder.
Bob Curwood
October 15,2019 23:01
had to re-assemble the Z drive on my Ender 3 pro, but have now lost the Autohome facility, extruder does not stop vertically and collides withe print bed. How can I recover the Autohome setting?
Sathish kumar
September 04,2019 14:11
Hi Sir/Mam, I have an issue in a 3D printer - Ender3& Cr 10S5. For Small prototyping, it doesn't make any Issues. During printing of Large file the Printing process stops in Between. Can you provide all the Possible Solutions?
Ian Summerfield
June 20,2019 06:26
Received my ender 3 pro the other day,magnetic mat not sticking to bed very well,prints not sticking to bed very well,so made simple glass plate with masking tape on it,turned heat bed off and so far working well.Masking tape cheap and a lot less mucking
April 21,2019 07:37
The Ender 3 Pro warranty begins and ends the second you purchase it. Creality does not honor their warranty.
April 19,2019 20:55
I purchased an Ender 3 Pro, worked great for a week. The bed is bowl shaped with the Cmagnet on it. Not so bad with a glass plate but prints do not stick half the time. Unfortunately, Creality and 3dprintersonlinestore are of no help. The Ender 3 Pro is n
March 29,2019 06:37
Have the ender 3 pro, printed 100s of items over the past couple weeks. All is great except several times, during a print, the lcd screen goes all funny and ends up blank with no control of the printer. print stops. have to reboot and resume print, whi
Luis Osorio
March 16,2019 23:36
From where can I download the assembling guide?
diego bordon
January 25,2019 01:08
hola ! en la ender 3 que compre. trajo un pendrive con unos archivos software and drives. para que sirve, o si tengo que instalarlos como lo hago?
Peter Marik
December 30,2018 03:15
Just got my Ender 3 a few days ago. today, the nozzle got stuck on the side of the plate and before I could free it, the machine stopped working and starting emitting this high pitched whine. The screen is on and blue, but doesn't display anything and the
October 31,2018 22:26
I bought a Creality Ender 3 Pro a week ago and assembled it and watching after watching a dozen of videos as the provided documentation is insufficient. I had to adjust things that were not even mentioned as they were misaligned from the original manufact
Carey Hall
October 24,2018 01:51
I am brand new to 3D printing and upon much research, I bought the Ender3 as it is rated high. But it does not come with detailed instructions ( think IKEA ) for getting to first print. very frustrating trying over and over to level the bed. I bought mine
Steven Acevedo
October 07,2018 01:24
Bought my Ender 3 a few weeks back, and now all of a sudden, my CPU power source whines every so often. It still prints fine , amazing actually. But curious as to why all of a sudden. Is the power blocking failing so soon?
Leave a Reply
Your email address will not be published.Required fields are marked. *
Name *
Email *
Verification code