Leading 3D Printer Company in China | Creality 3D
You are here: Home > 3D Printer > DIY 3d printer
Products

DIY 3d printer

Ender-5 3D Printer

Item No.: 201804090205
Creality Ender 5 3D Printer | 220*220*300mm |  BL touch auto leveling| Industrial circuit board and build-in motherboard |Cmagnatic sticker and resume printing function can print with all kinds of 3d printing.
  • Ender-5 1.1.6.3 firmware with resume printing functionDownload
INQUIRY
Description Highlights Parameters Ender Hot Review
Creality Ender 5 Advantages

【Stable Printing】The dual Y-axis motion control system drives the high-quality stable output of the two-sided timing belt, effectively avoiding the shock caused by printing.

【Build-in Motherboard Power Supply】The wires are concentrated in the machine's internal control according to circuit design, device specifications, and heat dissipation.

【Box-like Design】Ender 5 is designed differently from
Ender 3 3d printer, cubic-like looks more simple and generous, enhances the Creality space of printing, and multi-field collaborative design of products.

【Resume printing function】Automatically save the print record after power-off, continue printing after power-on, and improve the model print success rate.

【Simple leveling method】 The larger 3d printing nuts are ergonomically designed, and the leveling speed is fast, helps you get rid of the problem of time-consuming and labor-intensive.

【Industrial circuit board】High-load safety inspection, stable performance, continuous operation for 200 hours without pressure.


Other High Recommend Ender Series 3D Printer: Ender 3 | Ender 3 Pro | Ender 5 Pro | Ender 5 Plus


Ender 5 Firmware Download
Ender 5 Latest Firmware 1.1.6.3V Download
Ender 5 Bltouch Firmware Download
Ender 5 Source Code 1.1.61V Download:
Ender 5 SD Card File Download:

 
Creality Ender 5 Parameters
 
Molding technology FDM(Fused Deposition Manufacturer)
Print Dimensions 220*220*300mm
Print speed ≤180mm/s
Normal printing speed 40-80mm/s
Print accuracy ±0.1mm
Layer thickness 0.1-0.4mm
Nozzle diameter Standard  0.4mm  changeable 0.2, 0.3mm
Nozzle quantity 1
Nozzle temperature ≤260℃
Hotbed temperature ≤110℃
Working modes Online print or offline print
Power parameters Input:110/220V 50/60HZ Output: DC24V
Machine power 350W
Printing materials PLA/ABS/ TPU/WOOD/ COPPER/gradient, etc.
Filament diameter 1.75mm
File formats STL、Odj、amf
Net Weight  11.8kg
Gross Weight  14.2 kg
Machine size 552-485*510mm
Package size 610*570*345mm
The Creality Ender 5 3d printer is one of our picks for "Editor's Choice" in summer 2019. It packs the best bits from the Ender 3 Pro into a bigger, box-like frame, Let's check out the Ender 5 review to find out if it is worth the extra price.

Creality has become a major brand when CR-10 comes out. In 2016 we build up a new type 3d printer at a reasonable price. In 2017. Ender3 can be described as the most popular 3d printer overseas. In 2018, Ender 3 was upgraded to be Ender3 pro for more possible functions. Simultaneously, Ender5 comes out and also impresses people with its unique compact frame and update Functions.

The box-like printer has outer dimensions of 440 x 410 x 465 mm and builds a volume of 220 x 220 x 300 mm – so better make some room on your workbench. While the X and Y-axis measurements are the same as the Ender 3, the new version provides more room for the Z-axis. Each of the axes has a dedicated stepper motor. In a quite unusual way, the Y-axis motor drives both sides of the gantry at the same time so you get an overall smoother movement. The Z-axis is mounted in the middle of the bed with a big 8-mm-rod.



Overall, a Meanwell 350W / 24 V power supply (also to be found in the Ender 3 Pro) lets you heat the bed up to 100 degrees faster. The cable management is good – no loose ends here, so to speak. The printer runs a modified Marlin firmware. Ender 5 price is about $300 to $350. This price will be more acceptable for most people. And Right now Ender 5 can be added with BL touch for better auto-leveling.

Ender 5 Advantages:
Easy to assembly
Can deliver high-quality prints
Can achieve higher print speeds (80mm/s without quality problems)
Magnetic bed lets you easily remove the prints

Assemble:
Building an Ender 5 is even easier than building an Ender 3 or Ender 3 Pro. The axes come pre-assembled, so all you have to do is to mount the Z-axis to the base and wire up the printer. This can be done in half an hour.
Then how about the Test Prints? below is the test from ALL3D

Ender5 test prints: PLA Benches


Used the 200-gram spool of white PLA that came with the printer. To slice the model, we used the exact Cura setting provided by Creality.



Ender5: PLA Polypearl Tower

The PLA test prints were concluded with the Polypearl Tower, a torture test by Polymaker, a well-known filament brand. For this, we used Prusament PLA Galaxy Black. Although there were some dropped loops beneath the bridges, the print turned out fine.



Ender 5: PETG Benchy

Printing a bench with PETG (Verbatim Clear). The Ender 5 didn’t run into bigger problems. It’s quite common to see some stringing, but there was some visible warping and also slight under extrusion.



Ender5 test print: ASA


To print ABS or ASA without a proper enclosure will result in failure in 99 percent of the time. Still, the Ender 5 was able to finish both Benches, which is a remarkable feat for a printer that costs under $350. As expected, we encountered cracks and warping.



Ender 5: Surprise Egg

Surprise Egg #7 – Tiny Car Carrier, a 4-part print. This is a demanding task for the printer and the material, as there are tiny hinges that can easily be baked together while printing. Even harder: The wheels of the cars have to be printed accurately or they simply won’t turn.



Ender5: Autodesk Kickstarter test

Before we wrap up our impressions of the Creality Ender 5, we wanted to touch on the topic of 3D slicing software.

Creality provides you with an SD card that holds a Cura 15 or Cura 3.4.1 version – Windows only. On a Windows PC, we found that the Cura settings worked well, although the Cura version is pretty outdated.

Unfortunately, there are no Mac or Linux profiles. So, what can you do? First of all, you can download Cura directly from the Ultimaker website for free – and it will be even more actual than the one that Creality provides. Still, you’ll have to enter all the measurements and profile data from hand. This isn’t exactly what a 3D printing beginner wants to do.

What about the popular (but expensive) Simplify3D slicing software? At the time of writing, they offer no profile for the Ender 5. Again, you can add the data by hand if you know what you’re doing (which you probably do, as you’ve invested half the money of an Ender 5 in a slicing software). That said, we expect to Simplify to add a profile soon.

Check here More difference : Ender 5 VS Ender 5 Pro VS Ender 5 Plus



 


 
by Maria Di Salvo
May 22,2020
Ender 5
Please send all information on Creality Ender 5. Ours did not come with a booklet that has the instructions on putting this together so it was a guessing game. How to use and what settings this is to be at out of the box. Something for beginners that don't know anything about 3d printing but want to learn. Also, ours does not have auto bed leveling....... why not? Thank you
by luis
Dec 01,2019
I am interested in how to buy EXTRUSOR and a 3D chololate printer
Good I am interested in how to buy EXTRUSOR and a 3D chololate printer, indicate how I can buy and if there are distributors in Venezuela, Colombia, Chile or Latin America and USA, Thank you I will be attentive to your emails My whatsappes +58 4147100613 My email: serivenca@gmail.com Luis Gomez
by Riaan Janse van Rensburg
Aug 24,2019
Good printer, can be upgraded to be better
Great printer, Added TL smoothers, glass bed immediately. Then printed bed supports and LCD baord cover from thingyverse. Added spool reel clamp from thingyverse. Would be nice with a bootloader though. Next upgrade replace the boden tube.
by Mr. Koppetsch
Aug 16,2019
Information about ENDER-3 PRO
Dear all, please send me the complete manual of your printer ENDER-3 PRO. I need all information about safety and risks. What kind of material can i use with your printer? Do you have a CE Confirmation wghich you can send t me? I would like to use several of your printers in the company and for that reason I need all this information. Thank you very much! Best regards, Manfred Koppetsch from the company NXP Semiconductors Germany GmbH
by Gabriel Berenguela
Jul 30,2019
Creality Ender-5 impresora 3d
Hola donde se puede comprar en Chile

Review