Leading brand of 3D Printing Solution Provider | Creality 3D
You are here: Home > 3D Printing Materials > Filament
Products

Filament

CREALITY3D PLA FILAMENT

Item No.: 201804090402
Buy creality 3D supplies/filament.material  at best prices with several kinds of colors. more energy consumption, more resistant, even more environmental-friendly. it can last for about 3 months once it is opened. if not open,expire period:1 year
INQUIRY
Description Specification
Parameter:
 
 Material PLA ABS
Dimension 25.5CM*12CM*23CM 220-250℃
Density 1.25±0.05g/gm³ 1.04±0.2g/gm³
Melt flow rate 5-7g/min
(190℃ 2.16kg)
2-4g/min
(190℃ 2.16kg)
Water absorption 0.5% 1%
Tensile Strength ≥60MPa ≥43MPa
Flexural modulus ≥60MPa ≥60MPa
Elongation at break ≥3.0% ≥3.0%
 Diameter 3mm/1.75mm 3mm/1.75mm
Bubble 100% no bubbles 100% no bubbles
N.W 1kg(length:340m) 1kg(length:340m)
Coil Size Diameter: 200 high:66
Coil hole diameter 56
Diameter: 200 high:66
Coil hole diameter 56
Temperature PLA (no need to heat the heated bed) 80-120℃

Difference between ST-PLA and normal PLA:
Material Advantage Disadvantage
ST-PLA
  1. Including all the advantages of PLA
  2. With good tenacity(even at temp. of -10℃)
  3. The impact resistance of the printing model is 3 times than normal PLA(Print shell thickness has a good anti-drop effect)
  4. After opening, it can regularly be preserved within 3-6 months and doesn’t have any bad print effect.
  5. Anti-aging (the print out can save longer)
High cost
PLA
  1. Good compatibility and degradability of PLA, Good compatibility and degradability of PLA, non-toxic and environmentally friendly, strong stability.
  2. With low melt strength, good tensile strength and ductility, more easy to build up the models, and the surface is smooth with a colorful design.
  3. Suitable for all kinds of FDM 3D printer, printing artwork, and molding.
  4. Cost-effective
  1. PLA glass has a relatively high glass temperature and is brittle under normal temperature conditions.
  2. Poor anti-aging ability, Strong water absorption
  3. Print model requirements are thicker, no anti-drop.
  4. Need to be sealed after use

Review