Leading 3D Printer Company in China | Creality 3D
You are here: Home > Company News
News Category

Company News

Company News| Creality CR-6 SE Hit $3,000,000 To Unlock the 3rd Stretch Goal! From TMC2208 to TMC 2209

Glad to share the good news with you that Creality CR-6 SE has already hit $3,000,000 on Kickstarter on May 25th, so as to achieve unlocking the 3rd stretch goal---- to upgrade the TMC2208 to TMC2209.


Take a Note: Differences between TMC2208 and TMC2209
 


Both the TMC 2208 and TMC 2209 both have 1/256 interpolated and native 1/256 stepping support. They both are running StealthChop V2 for extremely quiet printing. Where these drivers differ are as follows:
 
Max Current Output – On average the TMC2208 drivers are rated up to 1.5A (2.0A Peak) continuous motor output. The TMC2209 are rated up to 2.0A (2.8A Peak).
 
Sensor-less Homing (aka StallGuard) – The TMC 2209 added a new feature that was from the TMC2130 drivers. It allows the motor to detect step loss at up to 1 full step of the motor. This means that you can use the driver to act like an endstop by ramming your hotend or bed up against your printer frame instead of an endstop switch. While this “works” on some machines it is only accurate to about 0.2mm of accuracy. Your stock endstop switches on a Creality machine are accurate down to 0.02mm or less.
 
Heat Output – The TMC2209s do run a little cooler than the TMC2208 drivers.

 
What's New for the Next Stretch Goal?
When reaching $5,000,000, Creality will release an exclusively designed color for our Kickstarter backers. What color are you expecting for? Why not go to the CR-6 SE Kickstarter page and leave a comment?


Perhaps, you missed some buzz about CR-6 SE.
The CR-6 SE is becoming a new beast catching great attention on Kickstarter with nearly 3,000% pledge funded by over 8,000 backers, but also creating a huge craze on YouTube. Let’s watch review videos from Naomi Wu, Joel Telling, Teaching Tech, and more.

It is such a new milestone that Creality has created together with numerous 3D printing fans all over the world. Truly appreciate everybody's attention and support! In the next 8 days, we shall keep up with good work in communicating with customers and backers.
 
Special price per piece:
Early Bird Price at $319
Kickstarter Special Price at $339


Special pack price for multi-pieces:
2 Pieces for $628
3 Pieces for $942
5 pieces for $1545
10 pieces for $3090
20 pieces for $6180

 
Back us Now!