Leading 3D Printer Company in China | Creality 3D
You are here: Home > Makers Guide
News Category

Makers Guide

Makers Guide | How to choose the 3D printed resin?

Are you thinking of 3D printing in resin? Would you like to understand even more concerning the technology behind 3D printing in material? Or you just can not determine which one of the 5 resins to choose? Then this article is helpful for you!

The Modern technology: Stereolithography
Stereolithography is the mommy of all 3D printing innovations. It is just one of the most widely made use of 3D printing innovations for plastic 3D versions. Instead of using powder or filament, Stereolithography modern technology makes use of a fluid resin to produce 3D prints. Because there are handling a fluid material, extra support structure is essential for looming components and also tooth cavities.

The 3D printing process takes place in a big tank full of fluid material. To start the process, a layer of UV-sensitive fluid polymer is spread over a platform. After that, by using a UV laser, discerning parts of the liquid are hardened, depending upon where the laser beam of light strikes. The remaining material in the container remains liquid. In the next action, the system, together with the version, is reduced, making room for the next layer of polymer to be drawn on top of the previous one. Again, the laser beam is put on set discerning parts of the fluid product.

This procedure is duplicated up until the design is ended up. The needed supports (for overhanging parts and also dental caries) are automatically generated and also as soon as the entire process is done, the design can be increased out of the storage tank and the supports are manually eliminated.
5 Different 3D Printed Resins
The primary advantages of 3D materials are smooth surface areas, high-quality, comprehensive prints and also a big variety of finishing and post-processing opportunities. And also allow's take a look at each of the 5 3D printed materials extensive.

1. Requirement Resin
It is a product that offers fantastic high quality at a low cost, making it the excellent low-budget product. It is offered with or without assistance; the support can be manually gotten rid of with tools as well as fining sand paper. Requirement Material has a high degree of information, it is translucent, really feels smooth to the touch and is simple to repaint and post-process.

2. Gray Resin
Gray Resin, previously referred to as Prime Gray, is a very smooth material, much smoother than mostly all other 3D printing products, and simple to paint. The typical surface comes in Natural Gray (Air Force Gray), yet in total there are nine finishing colors to select from: white, black, blue, eco-friendly, yellow, grey, red, orange as well as brownish. As you can read on this article, Gray Material is the ideal product to 3D print porcelain figurines.

3. Mammoth Resin
The primary advantage of mammoth resin material is that you can print in substantial sizes: 2100x700x800mm. And it comes with the exact same excellent quality and also level of smoothness as the various other resins. So, if you wish to print a large piece, wait no longer as well as pick mammoth material.

4. Clear Resin
As the name already exposes, Transparent Material is the material of your choice if you intend to publish in a clear material. The material is water-resistant by nature and also perfect for smaller versions that need a smooth, premium, transparent surface.

5. High-Detail Resin
Ultimately, the last resin, High-Detail Material, does not make use of stereolithography. So exactly how does this work? It jets ultra-thin layers of material onto a building platform. Each layer is quickly hardened by UV light. This process is continued layer by layer till the design is completed.

Again, assistances are needed for difficult geometries, which can be removed by hand or water jetting once the printing process is finished. If you need a little model with a huge level of detail as well as a smooth surface, choose the High-Detail Resin.