Leading brand of 3D Printing Solution Provider | Creality 3D
You are here: Home > Makers Guide
News Category

Makers Guide

Maker's Guide| Why is the FDM 3D printer Ender-3 so popular?


Not long after the first release of Ender-3 in March, 2018, this FDM 3D printer has sold like hot cakes within the first few months. It attracts consumers both from home and abroad, exceeding 100,000 units. CR-10, another 3D printer that has also established its reputation as the best value for money, most rated desktop 3D printers from online community ranking lists. They are both made by Creality’s engineers. These two printers just lead the trend.


 
What makes Ender-3 so popular? Let’s tell from reviews of customers.
 
1.Very satisfied, I thought I could only play a toy. The result was very high when it was printed back. It is completely beyond my imagination. Go online and download some models to print. The models you make yourself can also be printed. It's just perfect!
 
 2.The first purchase of 3d printer, pure novice, through the assembly and debugging of one night, the first small work is completed, and the subsequent adjustment parameters are refined, which is generally suitable for beginners, cost-effective, I hope that your family's products will become more and more it is good.
 
 3.The overall is still good, that is, the instructions for use are not detailed enough. The original cushion is the loss product, and the printing options should be debugged according to the product itself. Some are suitable for printing support, some are not suitable, but the effects are different. Not the same, the upper surface effect is still quite good, the lower surface is almost a little, and the benevolent sees the wise and sees the wisdom, learning to have one, pretty good, small investment.

 4.Deliberately evaluate after using it for a while. The printing accuracy is the same as expected, as shown in the figure. High-precision printing takes a little longer, but after all, it's desktop-level, it's already very good, and I plan to try it myself later. Very good shopping experience.

 5.A super cost-effective printer, personal feeling is very cost-effective, can be said to be very good in the thousand yuan printer. I am an amateur creator, I like DIY gadgets, but I don’t have enough tools to make it, and I’m not interested in it. After buying Ender-3, I suddenly felt that I could do it, and my heart was flying. I bought it for almost half a month. At present, the machine is running stably and the accuracy can meet my 99% demand. It is very good.

 6.Printed things, choose higher precision, the effect of printing is good, it is very good to use for a trial. The 0.15mm print puppy can't be finished at night. It can be continued to print after power off.


 7.The first time I used a 3D printer, it was a slap in the beginning. The so-called leveling is not so difficult, just use a piece of printing paper in the middle of the nozzle and the platform. That is, I always make mistakes and reversals. As a result, I accidentally put a small print on the heating table. In short, it took about 2-3 hours to get roughly clear. Inserting the consumables was the most aggressive.
At first, I didn't understand what it meant to insert the consumables into the nozzle. The result was a little bit inserted at the entrance, and the result was empty for a few minutes. You must pay attention to the consumables until you squeeze the red test consumables into the front of the small nozzle to complete! The customer service is very good, the question is answered very quickly, and the slicing software is basically understood at a glance.

All in all, the Ender-3 3D printer is really for the entry-level 3D printer hobbyist. Besides its appealing price tag, it’s also a highly accurate printer. For 200 bucks, it’s great to go. Just order from our websites!