Leading brand of 3D Printing Solution Provider | Creality 3D
You are here: Home > Knowledge Base
News Category

Knowledge Base

Something You Need to Know between PLA and ABS

With the development of FDM technology in China, 3D printer FDM technology is becoming more and more popular. In the current market, there are two kinds of mainstream filaments for FDM 3d printer: ABS and PLA. They are all engineering materials.
 

Here are some ways you nneed focus on when you choose the FDM printer filaments.
 
First, let’s learn about PLA and ABS. Compared with PLA, the melting point of ABS is about 200℃, and the nozzle temperature of printing ABS is generally 210℃ - 230℃. The melting point of PLA is about 180℃, it is lower than that of ABS. The nozzle temperature of printing PLA is generally 190℃-220℃. In terms of 3D printing model, PLA is harder than ABS. The model printed with ABS is darker, and the model printed with PLA is lighter. These are the small differences between ABS and PLA. 

Second, let’s share the printer's dependence on filaments. As far as FDM 3D printing is concerned, filaments are an important factor to ensure the precision of printing model. Each printer has its own printing consumables, and the diameter of filament can’t be wrong. Filaments sold on the market vary in diameter, generally, 1.75mm filaments are sold in 1.66mm, 1.7mm, etc. If the diameter is smaller than the standard of the printer, the filament will be stuck in the printing process, and the printing model will be misplaced. Therefore, it must pay attention to the filament diameter, and know that the majority of ABS printing consumables on the market are 1.75mm. The majority of PLA printing consumables on the market are 1.75mm and 3.00mm.

Three, for other characters, PLA is an environmentally friendly material. When you use filament PLA for printing, there will be a sweet smell like candy. However, the ABS will be a pungent smell. In addition, PLA also can print much bigger models without the heating bed, and the edges of the models will not be raised. But ABS is easy to warp.

Finally, before purchasing a printer, please make sure that the printing filaments what the printer is suitable for. The filaments produced by each manufacturer will have different additives, and the proportion of additives will be different. If the proportion of water added in filaments is too large, the outer wall of the printed model will appear accretion, which will affect the appearance of the model. Every 3D printer has one of the most suitable filaments. For example, there is an Ender-3 printer in Creality 3D, which is more suitable for printing 1.75mm PLA filaments after testing in the factory. If ABS filament is used, printing can be completed, but the printing effect is not as good as PLA. Therefore, it is recommended that each 3D printer only use filaments from the same manufacturer, and do not change printing consumables frequently.